Attempt to capture the essence of skateboard culture and, illustrating those narratives
varying from candid snapshots to artful photos and video, But it’s the cumulative
varying from candid snapshots to artful photos and video, But it’s the cumulative
force of website’s and Links, from notable to nobody, that demonstrates the impact
skateboarding had on so many different generations of skateboarders
and to share your skateboarding life with skateboarders from all over the world.
Contribute to the culture and, lifestyle and sport of skateboarding
Contribute to the culture and, lifestyle and sport of skateboarding
===================================================================
Let get some of the lingo down first.
* Length- The length of the board is measured from the tip of the nose to the tip of the tail. Average board length is 28″-32″.
* Width- The average width of a deck is 7.5″- 8.25″. Width is influenced by the size of the rider and the type of riding. Bigger riders and those doing vert typically prefer a wider deck.
* Wheelbase- The distance from one pair of inner mounting holes to the other inner pair. The average wheel base is 13″-15″, and again, the choice is influenced by the rider.
* Nose- the nose is the front section of the deck, just above the mounting holes.
* Tail- the tail is the rear section of the deck, just behind the mounting holes.
* Mounting Holes- Pre-drilled holes where the trucks are attached. Arranged as two sets of four holes; one set is near the nose, the other near the tail.
* Ply- When looking at the side of the deck, thin layers of maple veneer are visible. Layering the wood in a cross-grain pattern creates a stronger board than a single solid piece of wood. The typical board is seven-ply.
* Concave- The section of the board between the nose and tail curves up slightly on the sides. The concave gives the rider more control and to increase board strength.
Decks come in many different widths. The width you need depends on your size, skating style, and personal preference. Here are some general guidelines:
What skateboard deck width is right for me?Choosing the size of your deck will depend on any of three factors: Your age, height, and/or shoe size. In the end, deck size will generally come down to personal preference. Though, there are some basic guidelines that can help first time buyers.
स्कातेबोअर्द wheels vary in color, size and durability. The diameter and durometer of the wheel affect the way the board rides. The diameter and durometer are a matter of personal preference and skating style. Here are some general guidelines:
Diameter: Smaller wheels are slower, bigger wheels are faster.
52-55mm – Slower, but stable and good for trick riding and smaller riders
56-60mm – Beginners of all sizes on ramp, park and street60mm+ – Longboards, old-school boards, speed and rougher surfaces
Durometer measures the wheel’s hardness. Harder wheels are faster; softer wheels are slower but have better grip.Note: Standard wheel durometer is 99A.
87a – Soft wheel good for rough surfaces, longboards or street boards that need lots of grip.95a – Slightly harder and faster with a little less grip, but the grip’s still good.99a – Good speed and grip. Good wheel for beginners, street, ramp and park.100a+ – Hardest and fastest wheel with the least grip. Grip tape is the sandpaper-like material applied to the top of the deck that helps your shoes grip the board. ग्रिप्तापे most commonly comes in one large sheet that must be applied and cut based on the size and shape of your board. You can cut shapes out or choose different colors or patterns to customize the look of your deck.
Let get some of the lingo down first.
* Length- The length of the board is measured from the tip of the nose to the tip of the tail. Average board length is 28″-32″.
* Width- The average width of a deck is 7.5″- 8.25″. Width is influenced by the size of the rider and the type of riding. Bigger riders and those doing vert typically prefer a wider deck.
* Wheelbase- The distance from one pair of inner mounting holes to the other inner pair. The average wheel base is 13″-15″, and again, the choice is influenced by the rider.
* Nose- the nose is the front section of the deck, just above the mounting holes.
* Tail- the tail is the rear section of the deck, just behind the mounting holes.
* Mounting Holes- Pre-drilled holes where the trucks are attached. Arranged as two sets of four holes; one set is near the nose, the other near the tail.
* Ply- When looking at the side of the deck, thin layers of maple veneer are visible. Layering the wood in a cross-grain pattern creates a stronger board than a single solid piece of wood. The typical board is seven-ply.
* Concave- The section of the board between the nose and tail curves up slightly on the sides. The concave gives the rider more control and to increase board strength.
Decks come in many different widths. The width you need depends on your size, skating style, and personal preference. Here are some general guidelines:
What skateboard deck width is right for me?Choosing the size of your deck will depend on any of three factors: Your age, height, and/or shoe size. In the end, deck size will generally come down to personal preference. Though, there are some basic guidelines that can help first time buyers.
स्कातेबोअर्द wheels vary in color, size and durability. The diameter and durometer of the wheel affect the way the board rides. The diameter and durometer are a matter of personal preference and skating style. Here are some general guidelines:
Diameter: Smaller wheels are slower, bigger wheels are faster.
52-55mm – Slower, but stable and good for trick riding and smaller riders
56-60mm – Beginners of all sizes on ramp, park and street60mm+ – Longboards, old-school boards, speed and rougher surfaces
Durometer measures the wheel’s hardness. Harder wheels are faster; softer wheels are slower but have better grip.Note: Standard wheel durometer is 99A.
87a – Soft wheel good for rough surfaces, longboards or street boards that need lots of grip.95a – Slightly harder and faster with a little less grip, but the grip’s still good.99a – Good speed and grip. Good wheel for beginners, street, ramp and park.100a+ – Hardest and fastest wheel with the least grip. Grip tape is the sandpaper-like material applied to the top of the deck that helps your shoes grip the board. ग्रिप्तापे most commonly comes in one large sheet that must be applied and cut based on the size and shape of your board. You can cut shapes out or choose different colors or patterns to customize the look of your deck.
No comments:
Post a Comment